Distributed Hardware Firmware

SCP – 3.120
LP – 1.305
EP – 1.291
M5 – 1.292
MS – 1.291

• Support has been added for Acre One mobile credentials- KB11294
• Creating a new UserGroup would not load all site permissions unless full access was granted – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.305
EP – 1.291
M5 – 1.292
MS – 1.291

• Added support for Temporary Access Levels at the Cardholder level
• Creating Mobile Credentials raised a null value error – Fixed
• SSO using Entra ID was redirecting improperly – Fixed
• Badge Printing resulted in a failed print job – Fixed
• Show Image button on Events did not function – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.305
EP – 1.291
M5 – 1.292
MS – 1.291

• Added the ability to assign multiple Temporary Access Levels to a card
• Navigation bar has been resized to correctly display on iOS devices
• Identified and mitigated multiple security vulnerabilities

Distributed Hardware Firmware

SCP – 3.120
LP – 1.305
EP – 1.291
M5 – 1.292
MS – 1.291

• Support has been added for SAFR biometrics
• Added User Group permissions to API Post Event
• Added Intrusion Panels and Intrusion Panel History report categories
• Auto Card Number generation now supports larger numbers
• Improved search functionality globally
• Macro End Dates are now removed from schedule types that do not have end dates – Fixed
• Classification customizations are now respected globally – Fixed
• Alarm Zone Auto Disarm is now disabled when Enhanced Intrusion Processing is selected – Fixed
• When the Intrusion Panel license was exceeded, there was a non-friendly error message raised – Fixed
• SwitchTech Keys properly displays reports – Fixed
• Reset Views deleted all User Settings – Fixed
• Login and Two Factor pages were missing the Access It! icon – Fixed
• Deleting a Floor Code raised an error – Fixed
• Reports with pre-defined criteria now properly export – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.305
EP – 1.291
M5 – 1.292
MS – 1.291

• Added the ability to manage Dynamic User Groups
• Cardholder images now display more effieciently
• All imports now import images with badge design in mind
• Added the ability to assign temporary access levels to Cardholders

Distributed Hardware Firmware

SCP – 3.120
LP – 1.301
EP – 1.291
M5 – 1.292
MS – 1.291

• UserNumeric fields configured as a drop down with no default value raised an error – Fixed
• It was not possible to assign Elevator Readers to multiple Operating Modes – Fixed
• Alarms were not able to be acknowledged or cleared when adding comments – Fixed
• Changing a Cardholder Field name and clicking onto a different field would cause the old name to reappear – Fixed
• Showing or hiding columns would cause an error on the Cardholders page – Fixed
• SwitchTech Keys were not properly displayed within the Main category – Fixed
• SwitchTech Keys New button was incorrectly labeled – Fixed
• SwitchTech Key assignment brought up the wrong window – Fixed
• Assigned SwitchTech Keys were not visible in the web client – Fixed
• Printing reports on SwitchTech Cores threw an error -- Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.301
EP – 1.291
M5 – 1.292
MS – 1.291

• Added additional error handling
• The Remove all Access Levels button did not function. - Fixed
• The Selected Cards field of the Card category of reports would show numbers rather than logical names. - Fixed
• The Cardholders grid would not save the view when fields were added/removed. - Fixed
• The Add Cardholder dialog window was incorrectly titled. - Fixed
• The top portion of the Badge Preview window was being cut off. - Fixed
• The Print Reports from the Events screen raised an unhandled exception. - Fixed
• The View FARGO Connect Jobs button was visible despite licensing. - Fixed
• The Web Client screen now displays missing licensing. - Fixed
• It was not possible to edit and save a traka iFob. - Fixed
• If a traka iFob has no description, it will now default to the iFob's serial number. - Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.301
EP – 1.291
M5 – 1.292
MS – 1.291

• Support has been added for BEST SwitchTech Intelligent Key systems
• Wiegand card formats now support reverse bit stream and reverse bytes

Distributed Hardware Firmware

SCP – 3.120
LP – 1.301
EP – 1.291
M5 – 1.292
MS – 1.291

• Added additional error handling
• The Remove all Access Levels button did not function. - Fixed
• The Selected Cards field of the Card category of reports would show numbers rather than logical names. - Fixed
• The Cardholders grid would not save the view when fields were added/removed. - Fixed
• The Add Cardholder dialog window was incorrectly titled. - Fixed
• The top portion of the Badge Preview window was being cut off. - Fixed
• The Print Reports from the Events screen raised an unhandled exception. - Fixed
• The View FARGO Connect Jobs button was visible despite licensing. - Fixed
• The Web Client screen now displays missing licensing. - Fixed
• It was not possible to edit and save a traka iFob. - Fixed
• If a traka iFob has no description, it will now default to the iFob's serial number. - Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.301
MP – 1.291
EP – 1.291
M5 – 1.292
MS – 1.291

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
LP – 1.303
MP – 1.296
EP – 1.291
M5 – 1.292
MS – 1.291

• The keep-alive timer was duplicating on each page load which could lead to IIS resource errors - Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.303
MP – 1.296
EP – 1.291
M5 – 1.292
MS – 1.291

• The specified number of cardholders to display was not being saved – Fixed
• The web client would error out when editing a cardholder configured for date-based with NULL date values – Fixed
• Users with no alarm permission had sessions ending prematurely – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.303
MP – 1.296
EP – 1.291
M5 – 1.292
MS – 1.291

• Support has been added to view maps

Distributed Hardware Firmware

SCP – 3.120
LP – 1.302
MP – 1.291
EP – 1.291
M5 – 1.292
MS – 1.291

• When editing an output, the output number was offset by one - Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.302
MP – 1.291
EP – 1.291
M5 – 1.292
MS – 1.291

• The option for recording time was displayed for every step when adding a Macro – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.302
MP – 1.291
EP – 1.291
M5 – 1.292
MS – 1.291

• The Cardholder screen would timeout when dealing with large recordsets - Fixed
• Bosch and DMP Intrusion Panel support has been added

Distributed Hardware Firmware

SCP – 3.120
LP – 1.301
MP – 1.291
EP – 1.291
M5 – 1.292
MS – 1.291

• Timezone status requests did not return any results - Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.301
MP – 1.291
EP – 1.291
M5 – 1.292
MS – 1.291

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
LP – 1.301
MP – 1.291
EP – 1.291
M5 – 1.292
MS – 1.291

• Software has been re-developed for 64-bit functionality
• Support has been added for ASSA ABLOY Medeco XT Intelligent Key systems
• Support has been added for direct KONE elevator integrations
• Support has been added for Honeywell PRO42 panels
• API authorization now supports the use of a Bearer Token within the API header
• The API can now request all data within a GET card call
• Channel descriptions now reference RS-232 instead of Hardwired
• Reports exported to Microsoft Excel now default to XLSX
• New Channels default to IP Server instead of Hardwired

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• Readers using Elevator with Floor Select and separate SIOs for inputs and outputs would no longer function after a reset – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• It was not possible to do an advanced find and select search criteria for a specific card number - Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• It was possible to perform searches against cardholder fields a user had no access to – Fixed
• It was possible to force a card group to expire after the year 2035 – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• There was no way to view Cardholder images from the event screen – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• Support for FIDO U2F keys has been added
• Support for users to use 2FA has been added
• Added OSDP communication status as a column in the readers grid
• Support has been added enforcing that a cardholder can only have 1 active card enabled at a time
• Support has been added to email a report directly from the report preview screen
• Support has been added to add a M5 SIO to an LP controller
• SSO support has been added to SaaS environments
• Enhanced the site selector in the ribbon menu to allow for typing a site name
• UserGroups can be assigned basic access to new sites via the sites screen
• Support has been added to copy and bulk paste a UserGroup’s permissions across sites
• Added granular permission to control what access levels can be assigned, revoked, or viewed
• The Download All Files command has been removed from the SCPs menu
• Support has been added to prevent multiple operators from editing the same record at a given time
• A Macro step has been added for resetting an IP lockset
• Support has been added to disable automatic OSDP addressing
• The Evacuation report incorrectly prompted for cards not used in x hours – Fixed
• Site reports allowed for querying all sites despite a users access – Fixed
• It was not possible to run card access event reports and specify card-specific criteria – Fixed
• Cardholder access levels did not display when creating a new card - Fixed
• It was possible for a session to time out when a user had no access to alarms – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• It was possible to delete the reader type associated to a reader and result in an orphaned record – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• Added ability for Single Sign On (SSO) support
• Added ability to search users by full name
• Added support for the Aperio Escape and Return feature
• Added ability to create override credentials which can work on readers in the locked mode
• Added ability to create override credentials which can work on Aperio locks in privacy mode
• Added support for ENGAGE apartment mode on the NDEB locksets
• Added support for ENGAGE privacy mode on the NDEB locksets
• Added support for ENGAGE office mode on the NDEB locksets
• Added support for ENGAGE storeroom mode on the NDEB locksets
• Added an Inactive Card Listing report
• Added an Expired Card Listing report
• It was not possible to use HID 10302 formats with mobile credentials – Fixed
• Badge Types rendered to PDF before printing could loose quality – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• Setup.exe has been signed with a new certificate

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• The selected locations grid in the reports was not sorted alphabetically – Fixed
• ENGAGE Bluetooth models were incorrectly defined preventing them from being saved – Fixed
• ENGAGE credentials were downloading with activation date 01/01/1970 and would not work on control locks – Fixed
• ENGAGE storeroom function only worked for select LE models – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP – 1.295
EP – 1.291
M5 – 1.292
MS – 1.291

• A Badge Designer has been added
• System Status now reports any API options enabled as well as their expiration date
• Support has been added for HID mobile credentials- KB900
• Support has been added for Farpointe Data mobile credentials- KB898
• Support has been added for ACT ID RS2 mobile credentials- KB899
• Support has been added for Traka Cabinet integrations- KB896
• The Evacuation report used the wrong date comparison operator returning invalid results when ran – Fixed
• Access Levels preceded with a blank space were incorrectly assigned as temporary access levels upon card save – Fixed
• When deleting a card record, the associated Cardholder name was not logged – Fixed
• The firmware listed on SCPs grid was not automatically refreshing – Fixed
• The ability to activate a timezone was missing from the basic macro wizard – Fixed
• It was not possible to edit a global macro created within a different site – Fixed
• The SALTO tab in the cards screen was not available – Fixed
• The Access Level tab in the cards screen was not available when using a non-English language – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• Reports would fail to run when specifying card group as search criteria – Fixed
• Reports failed to run when using Internet Explorer – Fixed
• Enterprise systems using the multi-site view did not have filtered items grouped by site when running reports – Fixed
• When not using the ENGAGE integration, the associated event types could still be seen as criteria when running a report – Fixed
• When using event filters it was possible for a filtered event to display as the page was loading – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• Forms including Windows time zone drop lists (i.e. SCP) would fail to load due to Windows Updates adding new time zone items (ex. UTC -07:00 Yukon) – Fixed
• Limited usergroups could view all sites when editing other usergroups – Fixed
• Temporary card activations could not be configured within the basic macro wizard– Fixed
• Cardholder access levels could be viewed when the feature is removed from a usergroups permissions – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• The task step grant access was enhanced to allow for selection of a specific floor code on an elevator reader
• Macros emailing reports can now have customized text added to the email body
• Macros can now temporarily activate cards for up to one year
• A Macro step has been added to execute a data exchange package
• The SCP firmware can now be added as a column to the SCP screen
• The SCP serial number can now be added as a column to the SCP screen
• The SCP number can now be added as a column to the SCP screen
• Added ability to assign operating modes to elevator access levels
• Added ability to filter what card formats a usergroup can access
• The SCP debug can now be filtered to specific SCPs
• Added ability to retrieve debugging files from client or web client
• Added new timezone mode that respects day of the week OR holiday group
• Added new timezone mode that respects day of the week AND holiday group
• Added new REX mode to keep door strike active while the REX input is active
• Spaces within cardholder usertext fields were removed upon save – Fixed
• When an access level that was assigned to a card was deleted, no prompt about its assignment was raised and the access level would never be removed – Fixed
• Upon cardholder edit, date-based expiration fields would default to the year 2020 – Fixed
• It was possible to create a global macro when not having access to all sites – Fixed
• The Offline Devices report did not show all devices that were offline – Fixed
• After assigning an IP lockset to a card, an error regarding LocksetID was raised when the lockset was moved back to the available column – Fixed
• When custom scripting referenced a column that a user had no access to, an ambiguous error was raised when editing a cardholder – Fixed
• Virtual SIOs used with BACnet incorrectly defined the number of outputs – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• The Evacuation report used the wrong date comparison operator returning invalid results when ran – Fixed
• The custom LED table under SCPs was missing the Locked reader mode – Fixed
• It was not possible to print badge types – Fixed
• Cardholder reports would fail due to an ambiguous column when using card specific search criteria – Fixed
• It was not possible to run report wizards due to a missing aspx page – Fixed
• Enterprise systems could not run a report against more than a single site – Fixed
• The event reporting edit button was incorrectly displayed in the reader, input, and output screens – Fixed
• The Alarm Listing report failed when not specifying a date range – Fixed
• Report search criteria that should be displayed in a drop-down list was not being populated – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• Added ability to specify no default floor for an OTIS card
• When running a quick report and searching by company, the selection criteria label was not translating – Fixed
• It was possible to exceed the access levels per card limit when using temporary access – Fixed
• In enterprise systems it was not possible to save a cardholder until the sites tab was selected – Fixed
• An error regarding ActiveDate would be raised upon cardholder save – Fixed
• When granting full access to a site, not all reader commands were assigned – Fixed
• When assigning view selected permissions to IP locksets, an error about invalid column LocksetID was raised – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• An Auditing tab has been added to the Sites and Servers screen
• The Detailed Card Audit report returned 0 results – Fixed
• When assigning permissions to view select reports, reports from all languages were displayed – Fixed
• It was possible to edit a cardholder and remove all site references – Fixed
• The Last Update value was not being updated upon a site save – Fixed
• When editing a card and changing the card number the grid did not automatically update – Fixed
• The report wizard pages did not properly scale – Fixed
• When creating a new Macro the web client would raise the error page – Fixed
• Operating modes were displayed even if a user did not have access – Fixed
• User Fields have underscores as a placeholder in the web client – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• When searching for cardholders by company, the results would fail – Fixed
• When navigating to the Alarm or Events pages, the menu navigational screen did not load – Fixed
• It was not possible to add the cardholder status, activation date, expiration date, and department fields to the cardholder grid – Fixed
• It was possible to run a reader report on all readers despite having limited reader access – Fixed
• The Card and Cardholders screens did not properly load when using IE and Edge browsers – Fixed
• It was possible to change a card status despite a user having no access to the field – Fixed
• When editing user labels, the row would be highlighted in yellow with white text resulting in difficulty viewing – Fixed
• Domain Users were prompted to change passwords when their associated usergroup has a minimum password age setting set – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• When searching for cardholders by company, the results would fail – Fixed
• When navigating to the Alarm or Events pages, the menu navigational screen did not load – Fixed
• It was not possible to add the cardholder status, activation date, expiration date, and department fields to the cardholder grid – Fixed
• It was possible to run a reader report on all readers despite having limited reader access – Fixed
• The Card and Cardholders screens did not properly load when using IE and Edge browsers – Fixed
• It was possible to change a card status despite a user having no access to the field – Fixed
• When editing user labels, the row would be highlighted in yellow with white text resulting in difficulty viewing – Fixed
• Domain Users were prompted to change passwords when their associated usergroup has a minimum password age setting set – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• Multiple windows did not scale when using a screen resolution less that 1366x768 – Fixed
• It was not possible to add an email recipient under the macro steps – Fixed
• Searching for cardholders when not originating on page 1 would not return results – Fixed
• Adding a non-admin account would result in an error message about password does not meet minimum requirement – Fixed
• The alarm zone tab under readers did not show label names – Fixed
• When using card groups requiring activation dates an error would occur on card edit – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• Added ability to use up to 16 facility codes per SCP
• Upon SCP creation the default model is now LP-1502
• When searching for cardholders the page index would not be set back to 1 – Fixed
• When using large numbers of sites, the site drop list would expand off screen – Fixed
• The tool tip regarding card number referenced credit card data – Fixed
• Cards using a card group requiring active and expire dates allowed for being saved as active – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP/EP-4502 – 1.281
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• When printing badges, no auditing event was raised – Fixed
• When running a cardholder-based report with specific criteria an ambiguous column error was raised – Fixed
• The system status screen showed biometric support as yes regardless if it was licensed or not – Fixed
• When uploading an image, the upload button had to be clicked twice – Fixed
• When a user had no access to delete cards, an error regarding “unique name Delete” was raised when navigating to the cardholders screen – Fixed
• When running a report with saved criteria, an error about incorrect syntax was raised – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP/EP-4502 – 1.281
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• Saving the Always Interval resulted in disabling the Always Timezone – Fixed
• It was not possible to save a cardholder while the picture tab was not displayed – Fixed
• Cardholder drop down lists would not display all items when expanded – Fixed

Distributed Hardware Firmware

SCP – 3.120
LP/EP-4502 – 1.281
EP – 1.275
LP – 1.276
M5 – 1.275
MS – 1.275

• It was not possible to add in a new MR-62E – Fixed
• Floor code name assignments did not work for KONE or Thyssenkrupp elevators – Fixed
• It was possible to receive alarms from all sites after the creation of a new site despite a user having no access to alarms – Fixed
• When previewing reports in the mobile view, the preview screen was windowed – Fixed
• Cardholder reports would not allow for specifying search criteria – Fixed
• When clicking logout within the system status screen, a JavaScript error would be raised – Fixed
• When running a Cardholder report, the active data field was a textbox vs a drop-down list – Fixed
• Upon a session timeout it was possible for the next page navigation to result in an error page – Fixed
• The alarms grid would have misaligned borders when multiple rows existed – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• The entire web client has been modernized with a new layout
• Mobile web page support has been enhanced to allow access to all software sections
• It is possible to capture a cardholder’s image via a smart phone and mobile web page
• A light and dark theme can now be selected
• Support has been added to reset window layouts to their defaults

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• Cardholder reports requiring the companies option and limited permissions would generate an error – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• EP-1501 and EP-1501-PLUS SCPS can now have their model changed to LP-1501 or LP-1501-PLUS respectively
• When no permissions were allowed to the cardholder image and/or signature the cardholder could not be saved – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• When running the Card Not Printed Yet report, the search wizard was prompted – Fixed
• When creating a new cardholder, the Companies field was not defaulting to – Fixed
• When creating a new holiday with ENGAGE activated, a blank window would be displayed – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.271
LP – 1.271
M5 – 1.271
MS – 1.271

• Support has been added for direct integration to ENGAGE Gateways for the LE, NDE, Control, and RM/RU devices KB745
• Support has been added for Thyssenkrupp destination dispatch KB749
• Support has been added for operating modes KB750
• Basic macros can now be setup to control multiple devices
• Support has been added allowing M5 (Casi) hardware to use redundant communication
• Support has been added to enable the blue LED on OSDP readers
• System Status screen now reports the number of licensed features in use along with total number of licensed features

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
LP – 1.269
M5 – 1.256
MS – 1.256

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
LP – 1.269
M5 – 1.256
MS – 1.256

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
LP – 1.269
M5 – 1.256
MS – 1.256

• It was not possible to assign an IP lockset in an access level – Fixed
• Users permission to specific card fields were not being respected – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
LP – 1.269
M5 – 1.256
MS – 1.256

• The drop list used to specify search criteria in the cardholder screen was not alphabetized – Fixed
• The drop list used to specify search criteria in the cards screen was not alphabetized – Fixed
• It was possible to delete a timezone when it was used within a task – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
LP – 1.269
M5 – 1.256
MS – 1.256

• The User Listing report has been enhanced to include additional information
• The Cardholders Last Location report now includes the card number and facility code detail
• Cardholder based reports would fail when specifying access levels as search criteria – Fixed
• The Macro Listing report would fail when a macro included a step to email or print a report – Fixed
• Event and Alarm filters were not listed in alphabetic order – Fixed
• Macro’s had the ability to incorrectly control the Never timezone – Fixed
• Macro steps did not respect the user’s permissions to hardware – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• EP/LP-1502 and EP/LP-4502 now support the Schlage PIM protocol
• Macros created now default to a name based on the system date and time
• When adding a basic Macro the schedule option has been moved to the create a basic macro page
• Added ability to configure the first, last, and middle name fields to be read only
• When adding an EP/LP-1501 only a single reader would be created – Fixed
• It was possible to configure OSDP Multidrop when using an EP/LP-1501PLUS – Fixed
• The reader assurance profile for PKI + PIN and PKI +PIN + BIO were mislabeled – Fixed
• Legacy SCP’s would have their card count set to 0 when a site was updated and a user chose the option “reset panels later” – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• When editing a timezone the holiday friendly names would not be displayed – Fixed
• A conversion failed error message would be raised when printing a badge type – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• When adding a comment to an alarm while a new alarm occurs, the comment would not be saved – Fixed
• Users with a NULL LastLogin date could not be edited – Fixed
• It was not possible to configure an active or expire date for a user – Fixed
• Input numbers were offset between the number displayed in the grid and the number on the edit form – Fixed
• When editing an interval the holiday friendly names would not be displayed – Fixed
• Canned reports saved in the traditional client could not be ran in web client – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• The ability to clear KONE global COP/DOP masks has been added
• When assigning a temporary access level an error processing the request message was raised – Fixed
• When performing a Purge All Alarms it was possible for an incoming event to disrupt all web client connections – Fixed
• Mobile Web client incorrectly displayed cardholder name – Fixed
• When performing a status request of an elevator reader and the relay board was offline an error was logged in the event viewer – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• The mechanism used by reports and badge printing had a licensing issue which resulted in a red warning label on every item printed – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• It was not possible to program a standard elevator using a MR-52/MR-50 for the output SIO – Fixed
• If a standard elevator existed it was not possible to add a new SIO – Fixed
• Macros arming or disarming DMP areas did not work – Fixed
• DMP XR-550DN panel events would not display in the events viewer – Fixed
• When adding a virtual SIO, no readers would be created – Fixed
• The companies option was selectable as a cardholder column even if the option was disabled – Fixed
• The Access By Access Level report was missing IP Locksets – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.256
M5 – 1.256
MS – 1.256

• Support has been added for the KONE elevator integration KB679
• Support has been added for the Lifesafety power integration KB686
• Support has been added for the EP-4502 and Auxiliary Authentication Module (AAM) KB685
• Logins can be now created for the EP web browser within the SCPs screen KB687
• A Card can now be manually moved into an area KB690
• The allowed time between card presentations for the 2 card mode are now adjustable within the Sites screen
• The allowed time between card presentations for the escort mode are now adjustable within the Sites screen
• The event for Access Granted – Double Card can be displayed in the events screen
• An events tab has been added to the Macro screen
• The Users screen’s auditing tab now displays the users last login date and time
• The Users Listing report now includes the users last login date and time
• Support has been added for series 3 SIO hardware
• Multi-drop support has been added for OSDP readers used with series 3 SIOs KB688
• It was not possible to add a virtual SIO – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• When running a reader listing report for all readers an error is raised stating “No Items Selected” – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• IP Client using a single port has been enhanced for Enterprise systems by allowing a common channel to be selected across sites
• SCP Status requests now include the SCP ID
• IP Client using a single port was not properly re-assigning the SCP ID – Fixed
• When a user had view only access to card number or facility code, they could still edit those fields – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• When assigning a temporary access level spanning longer than 255 days there was no indication this was an invalid setting – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• When using more than 2,500 Readers/Inputs/Outputs and expanding the SCP tree, the devices would not populate – Fixed
• When running a report and specifying search criteria based on Company, the report would raise an error converting a string to a unique identifier – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• An enhancement has been made to the IP Client communication mode allowing multiple SCPs to share a single inbound TCP port KB61
• Adjusted Allegion NDE gateway communication settings to mitigate communication failures
• Added ability to display the embossed number to the cards screen
• Enhanced UserText drop lists to support 512K worth of data
• Resolved several minor nomenclature inconsistencies
• When deleting a global holiday, the holiday was not being removed from the holidays grid – Fixed
• The Honeywell PRO22IC-1MB and PRO22IC-4MB models were missing from the SCP model drop list – Fixed
• When a new reader was added to an existing access level, cards not previously within the SCP were not downloaded – Fixed
• If a User had no access to any report and an attempt was made to run a report an “error processing request” page was displayed – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212
MS – 1.236

• Support has been added for Compass Otis Elevator Destination Dispatching KB621
• Added ability to adjust the home screen for a given User Group KB629
• The Casi M2000 panel may now be configured to support the supervised reader’s on-board inputs and outputs or the panel’s physical inputs and outputs KB632
• Relocated the change password link to upper right hand corner
• Removed the options link as the DVR functionality listed is not supported
• If a single site had no inputs, outputs, or readers installed it could cause the respective screens to not load data when looking at a site that does have valid data – Fixed
• If a card was date based but had no active or expire dates configured, it would not display – Fixed
• If a cardholder was date based but had no active or expire dates configured, it would not display – Fixed
• When a new user group was created, an error would occur – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• When editing a card created prior to 5.4.0.8 an error processing the request message was raised – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• When adding a new SCP an error about missing OTIS columns was raised – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• Added ability to limit a user’s access to the Mustering screen
• Added ability to limit a user’s access to the Tracking screen
• After creating a One-Time Event Timezone, you could not edit it – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• When not using the SALTO SHIP integration, an error processing the request message was raised when adding or editing a card – Fixed
• It was possible to delete out all user accounts preventing any access to the application – Fixed
• The Alarm Listing report only showed the first line of comments – Fixed
• When a user only had access to limited sites, new records defaulted to members of all sites and could not be changed – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• Added support for SALTO SHIP integration and SALTO offline locksets
• With no permission to a Cardholder’s image a user was still able to see the image in the Events screen – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• An error would occur when adding an Access Level – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• An error would occur when printing a badge type – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.212
M5 – 1.212

• Added support for EP-4502 controller
• Added BACNet automation support for EP-4502
• Added support for SimonsVoss online locksets
• Added support for Suprema OSDP readers
• Added support for Allegion NDE series locks
• Added ability to manage Allegion AD and NDE series door settings
• Added support to enable link mode to pair Allegion readers to gateways
• Added ability to define card technology type downloaded to an ASSA ABLOY IP lockset (CSN, Prox, iClass, MiFare)
• Added remote authentication for ASSA ABLOY locksets
• Added ability to specify an exact number of access levels per card on a per site basis (1 through 128)
• Full support has been added for OSDP readers, including configuring baud rate, address, and secure channel
• Reports now provide subgroup and total record counts
• Reports have been redesigned to conform to the Access It! Universal.NET color schema
• Added ability to limit access to a Cardholder’s image
• Added ability to limit access to a Cardholder’s signature
• Added ability to limit access to a Cardholder’s biometric template
• Added ability to control which User Groups can login to the web client
• Added ability to limit how many users of a select user group can be logged concurrently
• Added ability to disable a user after a specified number of invalid login attempts
• Added ability to limit access to a card’s access level tab
• Creating new Users now logs to the event database which user group was assigned
• Added ability to automatically hide cardholder tabs when the user does not have access to any items on the tab

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• Client licenses were not being released upon exiting the web client – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• A security enhancement has made preventing the use of auto completion
• A security enhancement has made mitigating chances of a SQL Injection attack
• A security enhancement has made preventing the use of verbose error messages
• A security enhancement has made preventing the domain name used to login to be stored in a persistent cookie
• When editing a card and adjusting the active/expire dates and hitting the enter key on the keyboard, a random number would be generated for the card number – Fixed
• Reports that could not be ran from the reports screen were still being displayed – Fixed
• When running a report for selected items with nothing selected, the incorrect selection screen was displayed upon acknowledging the error – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• When using Google Chrome and the inactivity threshold was reached, the user was not instantly redirected to the log in page – Fixed
• When logged in as a limited account that only had access to select cards, only a single card was returned when searching – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• Version updated to match Access It! Universal.NET

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• A recent Windows 10 update caused all reports to report the error 91 Object Variable with Block Variable not set – Fixed

Distributed Hardware Firmware

SCP – 3.120
EP – 1.201
M5 – 1.201

• When a user only had access to limited sites, they were able to assign cardholders as members of all sites – Fixed
• When using a paired IN/OUT configuration, the door status for the OUT reader was highlighted in yellow indicating an unknown status – Fixed
• Within the Tasks screen, the condition “when a reader mode changes state”: The step when a reader/door Unlocks was incorrectly displayed as “when a reader/door locked” – Fixed

• When running reports that contained saved search criteria were raising an error – Fixed
• The button to have the card number auto populate was missing from the cards screen – Fixed
• The Timezone Utilization report and the Timezone Listing report would not run – Fixed

• IP lockset status updates were not reporting correctly – Fixed
• When configured for an elevator reader, it was not possible to remove any floor code override – Fixed
• When doing an advanced find, card group permissions were not being respected – Fixed
• When trying to preview a badgetype for a card with no badgetpye assigned, an error “conversion from DBNull to String” was raised – Fixed

• It was possible to rename embedded images not have a name in badge designer of a fat client, resulting in rendering issues from the web client – Fixed
• Magstripe encoding was not encoding when using the built-in magstripe encoding option – Fixed
• When emailing a report through a Macro, an error 429 Active X component can’t create object was raised – Fixed
• When performing an advanced find in the card or reports screen for values that are represented by numerical values in the database, the search results would not return any rows – Fixed
• Certain optional software license features were not properly respected by the software – Fixed
• When importing data and mapping a field to the companies column, the error Multiple-step operation generated errors”. – Fixed
• When the option to enforce unique PIN’s was enabled, it could not be turned off – Fixed
• After editing and saving a reader, the status for that reader was empty until the screen was refreshed – Fixed

• Support has been added for enhanced layout of parity bit(s) on a card when used by the ASSA ABLOY IP locksetsKB487
• Support has been added for the HID I’m Alive feature on supported readersKB484
• Support has been added for EP controllers to communicate via IPv6KB490
• Handkey biometric devices can now be wired directly to a reader port eliminating the need for a Handkey gatewayKB489
• Tasks can now be executed upon a SCP or SIO comm state changingKB488
• Tasks can now be executed upon a SCP or SIO power state changingKB488
• Tasks can now be executed upon a SCP or SIO tamper state changingKB488
• Support has been added allowing granular control of IP lockset functions to a user group
• References to Ingersoll Rand have been adjusted to reflect Schlage
• Reduced maximum number of system access level to 32,000
• Upon saving a SCP without making changes, the reader and SIO status’s were not refreshed correctly – Fixed
• The panel timezone list in SCPs was not in alphabetic order – Fixed
• Access to the Cardholder Access Levels was not being properly respected by the user’s permissions – Fixed
• Access to Video Recorders screen was not being respected by the user’s permissions – Fixed
• Access to Intrusion Detection screen was not being respected by the user’s permissions – Fixed
• It was possible to delete the User Group a user was a member of – Fixed

• When navigating to the IP lockset page, the page would fail to load – Fixed
• When using Internet Explorer, the Event Listing report would fail to run – Fixed
• When creating a new Timezone, the available Interval list would fail to load – Fixed
• Event filters were not respecting the applied specific locations or descriptions – Fixed

• When using a card number greater than 48 bits with the ASSA ABLOY integration, an error would occur when saving the card – Fixed
• When using Large Card numbers, it was possible for the system to incorrectly translate the card number – Fixed
• M5 hardware was not being disabled after a software upgrade - Fixed

• Support has been added for SALTO locksets
• Site modifications no longer download all SCPs at once, they are downloaded 5 at a time
• A Macro step has been added to reset all SCP’s
• Max SCP capacity has been increased from 512 to 1024
• When running the Detailed Card Audit report an error would occur – Fixed
• When a User was assigned limited access to a company, it was possible to add a Cardholder and not assign it to any company – Fixed
• The Cardholder Without Active Cards report did not respect access assigned at the Cardholder level – Fixed
• When logged in as a User with limited site access it was possible to create a cardholder and assign it to a member of all sites – Fixed

• When logged in as a User with limited site access it was possible to assign a cardholder to a member of all sites – Fixed
• When modifying an existing SCP, the SIO baud rate would default to 2400 – Fixed

• A First Card Unlock feature has been added for easy implementation of the First Card Unlock scenario KB216
• Support has been added for Honeywell PRO-WATCH hardware KB222
• Support has been added for Mercury M5 Hardware KB223
• A Classroom Extended Feature has been added allowing for a valid double card swipe at a reader to toggle between Lock and Unlock while the interior REX allows free egress KB224
• A Privacy Extended Feature has been added allowing for an interior push button to be pressed that disables access to the reader. Opening the door or pressing the interior push button a second time restores access to the reader. KB238
• An Office Extended Feature has been added allowing for an interior push button to toggle a reader between Lock and Unlock while the interior REX allows free egress. KB225
• An Apartment Extended Feature has been added allowing for an interior push button to toggle between Lock and Unlock. Opening the door or pressing the interior push button causes the reader to be unsecured. KB237
• Permission to which commands can be sent to a device (i.e Unlock Reader) are now selectable for a UserGroup KB226
• Communication between a SCP and server can now be encrypted with 256 bit AES encryption KB205
• Communication between a SCP and server now supports TLS encryption KB227
• Communication between SCP and SIO can now be encrypted using 128 bit AES encryption KB215
• Communication between SCP and SIO can now be configured up to 115,200 baud rate KB228
• Advanced Communication Settings have been added to mitigate network related SCP communication failure issues KB229
• Inputs and Outputs can now be mapped as needed for Door Contact, REX, and Strike per reader KB230
• When issuing a command to a device such as Unlock Door, an option to temporary override the default settings is available KB231
• Commands to reset an IP Lockset or Mark all entries as Dirty has been added
• Custom resistance values can now be defined for Supervised Inputs KB232
• Locksets now show the number of locks in use within the Home Status Screen
• Intrusion Detection Panels now show the number of panels in use within the Home Status Screen
• Tasks now can be enabled and disabled
• Elevator Configuration has been enhanced KB208
• Multiple Event and Alarm Filters can now be created and dynamically applied
• Intrusion Detection Panel Event/Alarms can now be filtered
• The Users screen now has a column reporting the assigned UserGroup
• When Enforcing Strong Password, the user’s password may no longer match the User Name
• Fields within the Event Viewer now respect the User’s permissions; if they do not have access to a field, it is now masked
• A Mask PIN Number permission has been added allowing a User to enter a new PIN, while not being able to view current PIN
• An Embossed Number field has been added to the Cards screen for searching and reporting purposes
• UserGroup’s can now be configured to view only select Reports
• UserGroups can now be applied to multiple Companies
• UserGroup permissions now allow for a granular control of which Readers/Inputs/Outputs/IP Locksets can be viewed when using the Enterpise edition of Access It! Universal
• Default Cardholder searches can now be based off of user defined criteria
• Friendly names can now be assigned to Holiday Groups
• Global Holidays have been added allowing for Holidays to span across sites
• Global Macros have been introduced allowing a single Macro to execute tasks across sites
• Macro Steps can now be assigned an execution order
• A Macros Scheduled for Execution report has been added that lists Macros and their schedules, as well as the next scheduled execution time
• Macro Auditing now includes the execution details and execution results
• Added the ability to run a report based on a date range of Last ‘X’ Number of Hours to go along with the existing date range selections
• An Interval Listing report has been added that lists Intervals and their properties KB233
• An Interval History report has been added that lists the history of the Interval KB233
• A Interval to Timezone Listing report has been added that lists which timezones the interval is applied to KB233
• An Alarm Zone History report has been added that lists the history of the Alarm Zone KB233
• An Alarm Zone Listing report has been added that lists the points and their properties of the Alarm Zone KB233
• An Offline Devices report has been added that lists devices in an offline or failed state KB233
• When previewing a report, the Report selection screen now remains on screen
• A Task can now be executed on a Access Granted Double-Card KB234
• A Task can now be executed on a Access Granted Double-Card (Door unlocked) KB234
• A Task can now be executed on a Access Denied Occupancy Limit Reached KB234
• A Task can now be executed on a Access Denied Area Not Enabled KB234
• A Task can now be executed on a Access Denied No Escort Presented KB234
• A Task can now be executed on a Access Denied Incomplete Card + PIN Sequence KB234
• A Task step to Lock a reader has been added. When locked no cards will gain access. KB234
• Task steps to temporarily change a reader’s mode have been added KB234

• When a biometric template was removed from the card, it was not removed from the SCP until the card was deactivated – Fixed
• When a card was disabled by the Unused Card Expiration Mechanism, it would deactivate itself an hour after being reactivated – Fixed
• The Cardholder Photo Gallery report has been limited to 500 records per report due to a memory leak in the images control
• Added ability to hide Cardholder Access Levels based on user permissions
• Added ability to force PIN to be entered after card when using Card AND PIN mode

• When adding Intervals to a new Timezone, an error would occur – Fixed

• A new “Filter False Door Forced Open Events” is now available allowing any door forced open event occurring within 3 seconds after it closes on a valid access to be ignored
• Added the ability to now enforce Card then PIN when a reader is set to Card And PIN mode
• Support has been added for a “One Time Event” feature within a Timezone
• When the Alarm Listing report was ran without any date range an error would occur – Fixed
• If an Access Level was assigned to a Cardholder it was possible to delete the Access Level – Fixed

• A new “Very Slow” setting has been added to the door contact response time to accommodate slow responding door hardware and avoid false door forced open events
• Support has been added for the ASSA Abloy Aperio 8:1 hub
• Alarm messages can now be up to 32,000 characters in length
• Several new card holder reports have been added – “Cardholders Without Access”, “Cardholders Without Active Cards” and “Cardholders Without Cards”
• A new “Alarm Zone Listing” report has been added
• EP panels using RS232 serial host connections can now communicate at speeds up to 115,200 baud
• IP locksets now support the new RS2 R901592C 33 bit card format
• IP lockset locations can now be used when setting up event and alarm filters
• The “Cards without access”, “Detail Cardholder Listing” and “Detail Card Listing” reports were not printing access levels assigned to the cardholders – Fixed
• The “Detail Card Listing” and “Detail Cardholder Listing” reports were not printing the department field – Fixed
• When a task was created that executed when a user enters a keypad command and the keypad command started with the number 9 the task did not execute – Fixed
• Under certain circumstances cards with more than one access level were not being downloaded to the SCP panels – Fixed
• When using elevator control if the starting relay number specified was greater than the number of relays available a “Command NAK’d” error was being generated – Fixed
• When doing an advanced find for a card holder there was no way to search based on card holder access level – Fixed
• When using a 41 bit Identicard card format along with 26 bit wiegand cards in the same SCP the 26 bit cards would not work – Fixed
• When using macros to email IP lockset events the emails were not being sent out – Fixed
• When adding multiple steps to a macro, the form would display additional unused fields – Fixed
• When attempting to execute a task from a macro, the task drop list was not populating – Fixed
• When a card is imported from the data exchange package, it would cause an error when saved within the web client – Fixed
• When using a large amount (700+) of Access Levels, cardholder searches would not work – Fixed
• When using the mobile web client, an error would occur when changing sites in the reader screen – Fixed
• When using the companies feature, a server error would occur when creating cardholders – Fixed
• When uninstalling a SCP/SIO there was not a warning dialog presented – Fixed
• The event ‘Access Denied – No Escort Card Presented’ was listed as event type 720 within the readers event tab – Fixed
• When setting alarm/event filters, the hyperlink would not load the proper page – Fixed
• When running reports, it was possible to run reports prior to selecting a record – Fixed
• When adding alarm comments, the comment was lost if a new alarm occurred prior to the original alarm being acknowledged - Fixed
• Hardwired channel baud rate speeds can now support up to 115,200
• IP Lockset locations can be selected within the filters section
• The mobile web client can now add custom alarm messages
• Support for the Aperio 1 To 8 Hub has been added

• If a user had limited access to Access Levels, an error would occur when adding new Cardholders – Fixed
• When modifying Cardholders, usertext fields set as drop-lists defaulted to the first item in the list – Fixed
• When using a Firefox browser, certain textboxes were not selectable – Fixed
• When using a Firefox browser, Macros manually executed where not executing – Fixed

• When adding new cards the credential format was not being populated properly – Fixed
• When adding new macros steps could not be added to the macro – Fixed
• When logging in to the web client the “enter” button did not submit your login information – Fixed
• When working with domain users some of the options for built in password security were available when they did not apply – Fixed
• Some of the list items did not have default null values – Fixed
• Depending upon the model number of the SCP panel that was selected alarm zones were not being properly displayed – Fixed
• When searching for readers from the readers screen nothing was being returned for valid searches – Fixed
• The default image when no signature for a card holder was present was not being displayed properly – Fixed
• When adding a card holder under certain circumstances a “Multi-Step Operation” error was being produced – Fixed
• Access levels could not be deleted – Fixed

• First release of Access It! Universal web client version 3.x